Band knife machine R750/R1000 – Instruction manual
Page
50 / 89
FPUH Rexel s.c.
ul. Radziwoja 11, 61-057 Poznań
tel.: +48 61 87 68 946
www.rexelpoland.com
The band knife length must be precisely sustained (see: Technical
specification). It is forbidden to use a band of specifications other
than mentioned in this manual.
Never touch a moving band knife with bare hands or some other
object not being the treated material.
It is forbidden to use two 4 sided bevel band. Use of double bevel
band is allowed.
It is forbidden to transport or store the machine in conditions that
do not meet the condition in chapter:
3. Transport and storage p. 31
It is forbidden to walk or stay under transported parts of the
machine, or in place where such parts may fall.
It is forbidden to work on the machine that is improperly assembled
or connected to the power supply.
It is forbidden to work without proper individual protection.
It is forbidden to work without protective covers, damaged or
removed covers. Such covers have to be replaced according to
maintenance procedures.
It is forbidden to perform any maintenance procedures by
specialists not authorized or trained by the manufacturer.
Do not put hands in places which can be considered pinch points or
mechanical crush points.
It is forbidden to perform any work with machine parts that are
connected to power without proper experience and qualifications.
Do not modify the machine in any way including the following parts:
drive mechanism, covers, safety system or labeling.
Work on the machine in explosion hazardous environments. There
is a risk of ignition or explosion if there is dust, liquid or gaseous
combustibles inside the machine.
Do not use the machine showing any signs of damage.
It is forbidden to work on the machine of unqualified personnel.
