Band knife machine R750/R1000 – Instruction manual
Page
37 / 89
FPUH Rexel s.c.
ul. Radziwoja 11, 61-057 Poznań
tel.: +48 61 87 68 946
www.rexelpoland.com
5.
M
ACHINE GENERAL DESCRIPTION
5.1.
M
ACHINE WORK PRINCIPLE DESCRIPTION
,
PURPOSE AND PRINCIPLE
OF OPERATION
Band knife machine R750/R1000 is a vertical type cutter with a band body
of the type “A”. The design of the machine is stationary.
Electric motor-driven cutting blade is in the form of a band that runs
along the fixed path guided by wheels, upper and lower guide. The speed of
movement of the knife is adjustable. The path of the knife movement in the
machine is constant.
Machine is designed to cut non-elastic fabric, elastic fabric, soft
cardboard or upholstery foam.
Material processing is applied to the stationary table forming part of the
machine. The foam is cut from the so-called "freehand" moving block of
material on the table. The may be equipped with a blowing tabletop for easy
maneuvering of the foam pieces. Machine, due to its design, requires manual
feed of the material to be treated. Due to the fixed structure of the machine
and immovable, permanently attached table, the machine is used for the
production of short series.
Machine can be used in prototyping process, in order to obtain the
desired shapes (workpieces) in the upholstery room.
Types of foam, to which the cutting machine is intended: the foam of
upholstery types T1830, T2130, T2538 and T3030.
The machine is designed to be operated by one operator. Some service
activities require the involvement of two people.
