Band knife machine R750/R1000 – Instruction manual
Page
42 / 89
FPUH Rexel s.c.
ul. Radziwoja 11, 61-057 Poznań
tel.: +48 61 87 68 946
www.rexelpoland.com
6.
I
NFORMATION REGARDING MACHINE USE
6.1.
M
ACHINE INTENDED USE
As it has been mentioned before the machine designed to cut non-elastic
fabric, elastic fabric, soft cardboard or upholstery foam.
CAUTION
WARNING!!!
Never treat any materials other than those specified in the specification of
the machine.
Connecting and disconnecting the machine to the power supply, setting
the parameters of material feed, all adjustments and maintenance work as well
as inspections and repairs should be carried out in accordance with the
procedures contained in this manual only by properly trained and qualified
personnel for the given task.
6.2.
B
EFORE THE FIRST START
-
UP
Before the first start-up, check if the machine is correctly assembled in
accordance with the instructions supplied with the machine. It may be possible
that the machine may be temporarily out of use for longer time. After each
prolonged shutdown follow the instructions in the subsection below.
6.3.
P
REPARING FOR THE FIRST START
-
UP OR START
-
UP AFTER PROLONGED
MACHINE SHUTDOWN
Prolonged machine shutdown is a situation when the machine is turned
off for a period longer than one month. After each such break or during first
start-up one has to:
Check if machine is approved for use by employer
Check if the machine has passed safety functions inspection
