Revv
Owner’s Manual
2.0
2.1
front panel layout
Input
¼” Instrument cable input.
Active Input – The active input jack is to
be used with guitars that have active
pickups and work better with lower
impedance than a guitar with passive
pickups. Because active pickups don’t
require high impedance and usually
provide a stronger signal out, this jack
provides the proper circuit in order to
keep the tone of the amp articulate
and preventing unwanted compression
and noise.
Passive Input – The passive input jack is
to be used with guitars that have passive
pickups and require high impedance for
proper signal transfer. This jack is de-
signed to get the strongest signal from a
passive pickup to the first tube stage.
2.2
Channel One (Clean)
Selected by: 1) pushing the designated
front panel momentary toggle switch up,
2) foot switch button #1 or a foot switch
preset mode setting, 3) MIDI and CC
commands.
Channel One CLEAN is equipped with a
treble, mid, bass and level control. The
passive EQ controls have a large range
for all different clean variations and
should be adjusted a little at a time while
C
H 1
C
H 2
C
H 2
AGGRESSION
FAT
BRIGHT
CONTOUR
MASTERS
MUTE
STORE
FX LOOP
ACTIVE
INPUT
CLEAN
CRUNCH
BRIGHT
CRUNCH
CRUNCH
GAIN
TREBLE
MID
BASS
VOLUME
GAIN
TREBLE
MID
BASS
VOLUME
PRESENCE
DEPTH
STANDBY
OFF
ON
MASTER 2
MASTER 1
PASSIVE
INPUT
The
100
