REVV GENERATOR Скачать руководство пользователя страница 6

Страница: 6 / 32

Revv

Owner’s Manual

safety instructions

& warnings

Please read, understand and follow all safety instructions in this manual, as well

as those on the rear panel of the amplifier. These instructions and warnings must

be followed for your safety, and also to ensure that the amplifier will serve you

for many years. Please use common sense when operating, this is a professional

instrument designed for electric guitar amplification, and should only be used with

electric guitar signals.

• Do not store or operate the amplifier

in damp/wet areas.

• Do not keep items that contain liquid

on or near the amplifier.

• Allow for 4-6 inches of space around

the unit when operating. This unit

produces heat and should be kept

away from flammable items/objects.

• Never obstruct the top heat vent when

the unit is powered on.

• Do not expose the amplifier to high

temperature, keep away from radi-

ators or heat producing/supplying

items.

• Be sure to connect to an AC power sup-

ply that meets the power supply specifi-

cations listed on the rear of the unit.

• Do not use an AC power cord that

is damaged, has been pinched or is

missing prongs.

• This amplifier must be properly

grounded to local standards when

being operated. Do not use 2 pole

extension or power cords to supply

power to this amplifier.

• Remove the AC power cord from the

amplifier when changing tubes, fuses

or when moving the amplifier. Always

replace fuses with the correct type

and rating. Always remove AC power

cord when removing chassis.

• The AC power cord should be re-

moved from the outlet when left

unused for long periods or when there

is risk of electrical storms.

• No user serviceable parts inside, all

service should be done by qualified

personnel only.

• Always make certain the proper load

is connected to the amplifier before

operating. Always make connections

to the amplifier with the power off.

• Your amplifier is designed to produce

high volume/sound pressure levels.

Long term exposure to these levels

can damage your hearing. Please use

hearing protection when exposed to

these levels for extended periods to

prevent loss of hearing or hearing

damage.

• Keep away from children.

1.2

Содержание GENERATOR

































Результаты поиска

Содержание GENERATOR

Отзывы:

Бренды по названию

Популярные бренды

REVV GENERATOR, Руководство пользователя

Результаты поиска

Содержание GENERATOR

Отзывы:

Бренды по названию

Популярные бренды