Revv
Generator 100w
Continuous Controller Commands (CC)
In order to use CC commands, the
Generator Functions have all been given
a designated number and a on or off
setting. When using and selecting a
function the number associated with the
function must be used and then the set-
ting of the function, on or off must also
be sent. Most MIDI equipment (Pedals
etc) allows you to select a CC number
and then designate whether it be turned
to on or off. (Consult the external equip-
ments instruction manual).
The following commands and their CC
numbers need only be sent an on com-
mand (0-63) as they are used to switch
between channels and aggression
levels which cannot be turned off, only
changed to a different channel or level,
on and off commands sent will produce
the same result.
The following command will switch to
the channel and then toggle through
the aggression levels with each use of
the command like using the footswitch
to switch to the channel and toggle
through the aggression levels. This
command will also respond to an on and
off command with the same result:
Channel two plus aggression toggle:
24 – (0x18)
The following commands control func-
tions that are turned
on and off
. These
functions require an
on
(0-63) and
off
(64-127) command (byte) to be sent
with the CC number to either turn them
on or off. If you are trying to use them
and are not getting them to respond,
chances are you are sending the wrong
command byte ( 0-63 is OFF and 64-127
is ON). (Consult the Peripherals instruc-
tion manual)
Effects Loop: 26 – (0x1A)
Masters: 27 – (0x1B)
Fat: 28 – (0x1C)
Bright: 29 – (0x1D)
Mute: 30 – (0x1E)
6.6
Function
Channel 1 Clean
Channel 1 Crunch
Channel 2 low aggression
Channel 2 medium aggression
Channel 2 high aggression
CC Number
(Hex Value)
16 - (0×10)
17 - (0×11)
18 - (0×12)
19 - (0×13)
20 - (0×14)
