Revox Joy S37, Руководство пользователя

Страница: 8 / 70

Revox Audio Server Introduction
Revox Joy S37 Audio Server Page 7
and settings in the operating system or in
the basic system configuration have
been modified. Loading any further
software of any type also causes an
immediate loss of rights under the
guarantee.
First contact
Various connections have to be made
before setting up your S37 for the first
time.
In order to ensure an optimum
configuration of the system, it is
important that all components such as
the monitor, keyboard and mouse are
connected when first starting it up.
Video transfer
The best picture quality for the transfer
of the Revox Audio Server GUI to your
picture display device is offered through
the HDMI connection. This supports a
resolution of up to 1920 x 1080 (Full HD),
assuming that your picture display
device also supports this resolution.
The S37 also has a VGA output. In
comparison to the HDMI, the VGA has a
reduced resolution.
It is only possible to operate one video
output concurrently at the S37. The
parallel operation of video outputs is
expressly not supported.
The HDMI is HDCP-compatible.
The factory-set resolution of the S37 is
1024 x 768. With this setting, practically
all picture display devices available on
the market can be used with the S37 in
such a way that a picture will be
displayed. You can set the optimum
resolution
in the S37 under
Settings/Display.
If the S37 stops displaying pictures, you
can press the Home button
S
on the
remote control for 10 seconds and then
press the "1" button on the remote
control to switch back to the 1024 x 768
resolution.
We recommend that the TV is turned on
when starting up the S37 for the first
time.
Audio transfer
You can set up the audio connection
between the S37 and your audio
amplifier in three different ways. These
have to be selected in the S37 Settings
menu in the Audio section.
You have the options
 Analogue

Digital optical

HDMI
These days, many AV Receivers already
have an HDMI input that can also
evaluate the digital audio signals on the
HDMI interface. Often however, the
HDMI cable is fed directly to a picture
display device or the AV receiver doesn't
have an HDMI interface. In this case,
you should use the optical digital output
on the S37. If you have just got a straight
stereo amplifier, connect the analogue
front output on the S37 with your
amplifier.