Revox Joy S37, Руководство пользователя

Страница: 58 / 70

Revox Audio Server Wireless keyboard
Revox Joy S37 Audio Server Page 57
Installation
In order to connect the optional wireless
keyboard to the S37, plug the USB
receiver supplied with the wireless
keyboard into one of the USB sockets on
the rear of the S37.
Then insert the batteries into the
wireless keyboard and move the sliding
ON/OFF switch on the underside of the
keyboard to the ON position.
During production, the receiver and the
keyboard are synchronised to the same
radio channel.
Now press a key on the wireless
keyboard to test whether it can
communication with the S37.
Manual synchronisation
If the S37 doesn't respond to the
keyboard
command, a manual
synchronisation has to be carried out. To
do this, press the pairing button on the
underside of the keyboard while the S37
is switched on.
Now the middle LED on the front of the
wireless keyboard lights up for about 10
seconds. Following this, you can operate
the S37 through the keyboard.
Sometimes, even after carrying out this
manual synchronisation, the wireless
keyboard still does not communicate
with the S37.
In this case, first press the LED button on
the USB receiver.
The LED then flashes three times. Then
press the pairing button on the wireless
keyboard again.
The keyboard should be close to the
USB receiver during this synchronisation
process.
If there is still no communication, please
use the extension cable supplied and
position the USB receiver in such a
position that there is a sight line
between the wireless keyboard and the
USB receiver.