Revox Joy S37, Руководство пользователя

Страница: 60 / 70

Revox Audio Server Remote control – TV programming
Revox Joy S37 Audio Server Page 59
TV programming
Programming by model number
 Press the
F
and
OK
buttons on the
remote control for at least 3 seconds,
until the green LED flashes twice.
 Select and enter a 3 digit TV code from
the code list that corresponds to your
television brand.
 The green LED flashes twice to confirm
the code input.

If an invalid 3 digit code has been
entered, the LED lights up for 3
seconds to indicate an error and the
remote control returns to the original
mode.
 If your television doesn't react or
reacts
incorrectly, repeat the
programming and enter the next 3 digit
code from the list.
 If none of the defined codes controls
your television, use the automatic code
search option. See
Automatic search
.
If no button is pressed for 10 seconds
during programming, the remote control
automatically returns to the original
mode.
Search with manufacturer number
 Switch your television on.

Press the
F
and
OK
buttons on the
remote control for at least 3 seconds,
until the green LED flashes twice.

Enter the code 0 0 3. The green LED
flashes twice to confirm the input.
 Enter the three digit manufacturer
number from the manufacturer list. The
LED flashes twice to confirm the input.
 Press and hold the
Power
button until
the television switches itself off.
 Then release the button immediately
and press the
OK
button, in order to
save the selected television code.
The LED lights up every 1.5 seconds
while the code search is being made.

If a 3 digit code is not recognised, the
green LED lights up for 3 seconds and
the remote control is reset to the
normal state (error display).
 If your television brand (manufacturer)
is not in the code list, indicated by the
remote control flashing 5 times at the
end of the list, use the automatic
search function.