Revox Joy S37, Руководство пользователя

Страница: 44 / 70

Revox Audio Server General functions
Revox Joy S37 Audio Server Page 43
General functions
This chapter contains some function
descriptions that were not included in
the general part, in order to improve
readability.
General control
Within the S37 you can control all the
functions using the
6
,
5
,
8
and
7
buttons, the
G
button, the Back button
1
and the Menu button
A
. These
controls are the same across all the
archives.
Normally, the currently highlighted entry
has a blue border around it. Further
functions
principally affect the
highlighted entry.
You are frequently confronted with
dialogue windows where a decision has
to be made.
Within such a window, you can move the
highlighting with the arrow buttons and
then confirm your selection with the
G
button.
Volume control
The volume can be controlled in various
ways. In many cases, the most
convenient solution is to control the
volume through the audio amplifier. If
you decide to go with this method, you
should always set the S37 volume
controller to 100%, in order to get the
best sound quality.
Another method is to control the volume
in the S37. The Volume buttons
s
,
j
on the remote control adjust the level of
the S37's audio outputs.
Using the Mute button
C
, the audio
output can be silenced with a single
button-press. Pressing the mute button
again reactivates the S37's audio output
at the previously set volume level.
Pressing one of the Volume buttons
s
,
j
themselves also reactivates the
audio output.
Selecting entries
In the Revox Audio Server, multiple
entries from an archive can be selected
with the Select button
R
.
Highlight the desired entries with the
arrow buttons and then press the Select
button
R
.
Press and hold the Select button
R
for
about 2 seconds to highlight all the
entries in a folder. In the same way, you
can remove the highlighting from all
selections by pressing and holding the
Select button
R
for about 2 seconds
again.
This function can also be activated
through the Menu
A
and the "Select
all/Cancel selection" option.
The number of highlighted (selected)
elements and their total size are shown
for information purposes in a status
display.