MAN-000020-00 REV A
21
2. Starting a Charge Cycle
a. Connect the battery to the charger. Once the battery is detected, one of two
messages appears on the LCD:
The LCD displays the
PUSH START
screen.
If
Charge Autostart
is enabled, the charger automatically starts the charge
cycle, and briefly displays an
AUTO START
with a timer count-down
message as shown below. The timer will count down from 5 to 1 before the
charge cycle starts.
If either the “Start” or “Auto Start” screens are not displayed, the battery has
not been detected. Make sure that the battery cables are connected properly.
If the charger is not set to start automatically, start the charge cycle by
pushing the green
START
button on the keypad.
The charge cycle begins and a screen similar to one of the following, showing
the charging operation, appears:
