Revere Rescue Racer X 2.0, Руководство по обслуживанию

Страница: 52 / 246

Page 404
CHAPTER 4
May/12
9107
SERVICE MANUAL
Page 404
Feb/11
CHAPTER 4
283
SERVICE MANUAL
ISO 9650
1.4 Webbing, ropes, cordage and Velcro’ strips. Check for:
1.4.1 Damage and fraying.
1.4.2 Discoloration and deterioration (including any material in contact
with them).
1.4.3 Incomplete bonds to fabric.
1.4.4 Broken or worn stitching.
1.5 Marking
1.5.1 Whenever the equipment is being serviced, the labelling and data
labels are to be checked for legibility, for correct information and for
secure attachment.
1.5.2 The labels are located in the following positions on the Revere
Supply product:
- ID label at doorway entrance
- outside surface of container
1.5.3 If a label has become damaged or illegible, replace it with a new label
containing the original information or request a replacement from
Revere Supply.
1.5.4 If a label is to be updated, use an indelible marker pen.
2. Detail
2.1 Gas inf ation system:
NOTE: Refer to the manufacturer’s manual listed at the front of
this manual, in Associated Publications section.
WARNING: A GAS CYLINDER CAN BE A LETHAL PROJECTILE IF IT
DISCHARGES TO ATMOSPHERE. ALWAYS ATTACH A
RECOIL CAP TO THE GAS OUTLET WHEN HANDLING A
FULLY CHARGED CYLINDER. HOLD THE CYLINDER IN A
VICE OR SAFETY CLAMPING DEVICE WHEN ATTACHING OR
REMOVING AN OPERATING HEAD.
WARNING: OPERATING HEADS MUST NOT BE CHECKED UNTIL THEY
HAVE BEEN REMOVED FROM THEIR CYLINDERS.
2.1.1 Operating heads must be tested. It is essential that they are removed
from the cylinders before testing.