Revere Rescue Racer X 2.0, Руководство по обслуживанию

Страница: 125 / 246

SERVICE MANUAL
Page 803
CHAPTER 8
9107
May/12
Page 803
Feb/11
CHAPTER 8
283
SERVICE MANUAL
ISO 9650
1. General
1.1 The paragraphs of this chapter apply generally - unless a suitable
qualification (in bold print) is present.
1.2 The work area must be clean, dry and free from sharp projections, with a
smooth working surface, preferably of vinyl material.
1.3 Special Tools, Equipment and Materials:
1.3.1 Refer to Chapter 10 for the list of relevant items that are required
during the assembly and repacking of a liferaft.
1.4 Throughout the description of packing, components which are listed within
the Illustrated Parts List (Chapter 11) and Consumables & Equipment
(Chapter 10), appear in italic print.
1.5 Throughout preparation and packing of the liferaft and its associated
equipment, all knots are to be bowlines with flying ends taped, using 25mm
wide PVC self adhesive (SA) tape, unless stated otherwise. The ends of
cords are to be heat sealed to prevent fraying.
1.6 Ensure that during unpacking, preparation and repacking of the liferaft no
moisture is introduced to the liferaft.
1.7 The liferaft must be completely dry before packing.
2. Preparation of the liferaft
2.1 For each liferaft, carry out the following operations:
(Refer to FIGURE 801 for Throw Over):
2.1.1 Fit adaptors and valved sockets (female couplings) to the inflate/
deflate valves.
2.1.2 Fit a plug, tail (male coupling) to a low pressure air line and to the
manometer feed line. Connect the low pressure air line to each
inflate/deflate valve as necessary. Inflate the liferaft to approximate
working pressure.
NOTE: Inflation of the liferaft is advised, to ensure correct fitting
and rigging of the equipment and to ensure the liferaft is
the right shape for packing after deflation.