Revere Rescue Racer X 2.0, Руководство по обслуживанию

Страница: 23 / 246

SERVICE MANUAL
Page I7
INTRODUCTION
9107
May/12
Page 7
Feb/11
INTRODUCTION
283
SERVICE MANUAL
ISO 9650
6. Service provision
6.1 The provision of service on liferafts, at the intervals required by governing
legislation or by the Design Authority, is detailed in Chapters 2 to 8 of this
manual.
6.2 Servicing work must not be done to Revere products except by or under
the direct supervision of Revere Supply Co. certificated service technicians
employed by and working in the approved premises of Revere accredited
service agents.
6.3 In brief, the following tasks shall be carried out:
6.3.1 The servicing record chart on reverse of the Liferaft Identification
Label is to be completed at each servicing including:
- The stamp of the Certified Operator who serviced the liferaft in the
place designated.
- The number of the Certificate of re-inspection is to be written in the
space provided.
- The Service Station Manager or Chief Inspector is to sign this card
in the space provided.
6.3.2 Liferafts shall be unpacked in accordance with Chapter 2.
6.3.3 Liferafts and constituent items shall be cleaned and inspected in
accordance with Chapters 3 and 4.
6.3.4 Testing appropriate to the age of the liferaft (refer to Chapter 5,
Paragraph C.1. onward) shall be carried out according to Chapter 5.
6.3.5 Required repairs shall be carried out according to Chapter 6 provided
the appropriate techniques are described there. In all other cases
procedural advice shall be obtained from Revere Supply Co.
Technical Services.
6.3.6 Sub-assembly processes and repacking of the liferaft shall be in
accordance with Chapters 7 and 8.