REV BW 1000 PS Скачать руководство пользователя страница 8

4.  Within 1 metre distance there must not be other lamps induced by the BW 1000 PS,     

as  a heat source would lead to permanent switching.

5.  For the same reason no projectors must be directed to the BW 1000 PS.
 

Chose of the detecting range

The detecting range should be limited to be as small as possible. The risk of failure 
switching raises with the size of the area covered.
The detecting range can be limited by help of impenetrable material (for example 
adhesive tape).
The detecting range should be situated crossways to the walking direction as when 
passing through from this direction rays will have the best effect.
 

Tips

The BW 1000 PS cannot be used with alarm systems as it is no protected against acts of 
sabotage.

 

Electrical connection

These products have been developed and manufactured according to current technical 
standards. You are obligated to install these products according to existing regulations or 
to have it installed by an electrician. Indications of the instruction manual have to be 
observed during installation or operation. We reserve the right of technical alterations. 
Before starting work please make sure that the electrical network is switched off.
Connection to 230 V~, 50 Hz
Phase

(L)

connect to terminal L

Zero conductor

(N)

connect to terminal N

Appliance

connect to the terminal ->

 

Connection examples:

BW 1000 PS directly at the electrial network 

BW 1000 PS with switch or two-way 

switch.
The detecting range is surveyed continuously

The BW 1000 PS can be switched off.

 

BW 1000 PS with multicircuit switch.                    Several BW 1000 PS parallel.
Changing-over from manual operation

Several BW 1000 PS are switching one

to automatic operation. In case of 

circuit (wattage max. 2200 watts).

manual operation manual on/off-function.
 

Another switching possibility is given by connecting  in series a push button which opens 
the network. This push button which takes away the phase during pushing simulates a 
mains failure. After pushing it allows light to function for the time the BW 1000 PS is 
programmed.

8

BW 1000 PS

L

N

N

L

N

L

BW 1000 PS

L

N

N

L

BW 1000 PS

L

N

L

N

BW 1000 PS

BW 1000 PS

N

L

N

L

Содержание BW 1000 PS

























Отзывы: