manualshive.com logo in svg

Rethink Robotics Baxter, Руководство пользователя

Поделиться
Скачать
Rethink Robotics Baxter Скачать руководство пользователя страница 179

177

Intera 3.2

Appendix G: Safety Mats

Baxter supports the optional use of a safety mat—a 4-wire Normally Open (N.O) configured mat of 
any size or shape (user-supplied, not included. To connect a safety mat to Baxter, use a terminal 
block that can connect to the DB15 connector on the I/O panel on the back of the robot’s waist, and 
support a male-configured DB15 connector for the e-stop button. 

IMPORTANT 

 If e-stop wiring is not properly configured, the Baxter arms will not operate.

To configure the terminal block: 

1. Power Baxter down and remove the e-stop assembly. 

2. Connect the terminal block connector to the DB15 connector where the e-stop 

button was originally connected.

3. Run the bare wires from the safety mat into the terminal block, and wire them 

with appropriate jumpers, as shown in the diagram on the following page. To 
ensure full e-stop support, pass the e-stop wiring through to the illustrated pins 
on the extended DB15 connector.

4. Once configured, with the terminal block and e-stop properly connected, power 

Baxter on per normal operation.

Note: 

When Baxter is working, if a user steps on the safety mat, Baxter will slow down 

and express surprise.

A wiring diagram is included on the following page.

Содержание Baxter
























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды