manualshive.com logo in svg

Rethink Robotics Baxter, Руководство пользователя

Поделиться
Скачать
Rethink Robotics Baxter Скачать руководство пользователя страница 160

158

Intera 3.2

Task Reset In (edge and level): pauses (level) and resets (edge) the task.

Error In (level): stops the task.

Pause (level, enable): pauses the task when asserted

Do Subtask (level): when true, signal the subject is allowed to run. 

Reset Count (edge): reset count for the associated task element. 

OUTPUTS

Done (level): the count for the particular task element has been reached. Stays true until the count is 
reset.

Note: while Done is a level, due to the automatic resetting of counts it will often stay on for only a 
short period of time, but always at least 0.5 seconds.

Increment Count (pulse): the count for a particular task element has just changed. This only hap-
pens if the element is successful.

Start (pulse): a task element is starting.

End (pulse): a task element is finishing.

Task Reset Out (pulse): the Task has been reset.

Error Out (level): the Task has an internal error.

Confusion (level): the Task is in a confused state.

Active (pulse): the associated hold is currently executing.

INTERACTION OF READY AND CONFUSION

In most cases, connecting the Ready signal to a task element will suppress that element from caus-
ing confusion (and, therefore, setting the Confusion signal true). Specifically, if a task is not currently 
running any actions, Intera makes an effort to determine whether a Ready signal becoming true 

Содержание Baxter
























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды