manualshive.com logo in svg

Rethink Robotics Baxter, Руководство пользователя

Поделиться
Скачать
Rethink Robotics Baxter Скачать руководство пользователя страница 125

123

Intera 3.2

Robot Positioning System

Frequently Asked Questions about Robot Positioning System

Q:  I tried registering a landmark, but I get a message that says “Multiple landmarks are visible.” 
What should I do?

A:  The robot is seeing more than one landmark. Cover one of the landmarks with your hand until 
just one is recognized. Then, press Save and keep your hand covering the other landmark until the 
desired landmark is saved. 

Q:  I registered a landmark but now I would like to remove it. What do I do?

A:  Select the action whose landmark you’d like to remove and go into the landmark gallery panel as 

described above. Once in this gallery, select 

 and the landmark will be de-associated from that 

particular action. 

Q:  When I relocate the robot, will my custom paths be erased?

A:  No. The path will remain the same but the end points (i.e. Approach/Retract) will move to the 
new locations. 

Q:  When I have Action Groups, do I need to associate each action to a landmark or may I just 
associate the whole Action group to the landmark?

A:  If you have an Action Group and would like to associate all actions to a landmark, you can just 
associate the whole Action Group in one step.

Q:  Are there any special lighting requirements for using landmarks?

A:  Recognition of landmarks works best with soft, diffused lighting that does not produce hard 
shadows.  

Q:  Does the landmark need to be trained at the same orientation as the pick or place action?

A:  No.  You could have your landmark mounted horizontally to the frame of the conveyor even 
though Baxter will pick in an off-vertical orientation on the conveyor. 

Q: Can a landmark be associated with a Hold?

Содержание Baxter
























































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды