Restomod Air VAPIR 2 system, Инструкция по установке и руководство пользователя

Страница: 28 / 44

TOP VIEW OF DRIER
Be sure to mount drier
vertically with fittings
to top.
IN
#10-20 x 1/4”
HEX-HEAD
#10 - 16 X 3/4”
TEK SCREWS
YES NO
CONDENSER PREP
Page 26 866.784.4278 www.restomodair.com
CONDENSER PREPARATION. Attach brackets using supplied #10-20 x 1/4” HEX HEAD screws to condenser mounting holes found on
each side of condenser. The condenser must mounted to vehicle so that the larger fitting is on top
(FAILURE TO DO SO WILL CAUSE AIR CONDITIONING SYSTEM TO FUNCTION INCORRECTLY).
DRIER PREPARATION. First insert the drier into the drier mounting bracket (it’s basically a sleeve for the drier). Screw the
high-pressure switch into the port at the drier. Go ahead and plug the pressure switch harness into the switch at this time (black
electrical boot with two long white wires). Mount Drier in preferred location with connections upward. Keep in mind the threaded
connection labeled “IN” will connect to the lower connection of condenser.
PRESSURE SWITCH: Install the supplied pressure switch to the port on the top of the drier (Looks like a bolt head). Remove dust cover
and attach wiring harness to electrical connections