Restomod Air VAPIR 2 system, Инструкция по установке и руководство пользователя

Страница: 27 / 44

ENGINE
COMPARTMENT
During the next steps you’ll be installing the
condenser, drier *, and routing the pressure switch*
wire and the A/C lines. Since much of this is
installed in the OEM location for the condenser,
you’ll probably need to remove the center grill
section, horn(s), and latch support assembly
(see figure 37). Be sure to retain all the mounting
screws –
you’ll reinstall these pieces in the exact reverse
order with
the OEM screws.
*If Applicable.
Engine compartment instructions
Page 25 866.784.4278 www.restomodair.com
IF YOU HAVE NOT DONE SO ALREADY,
DISCONNECT THE BATTERY.