Restomod Air VAPIR 2 system, Инструкция по установке и руководство пользователя

Страница: 23 / 44

Next, route all A/C and heater hoses from evaporator unit to your firewall. Make sure you have the correct
orientation on the electronic water valve...
IMPORTANT NOTICE... WATER VALVE MUST BE INSTALLED PER
THESE INSTRUCTIONS:
The lower connection on the tubes coming thru
the block off assembly is going to be routed to the water outlet on the intake
manifold. Attach your hose with cable clamps on both ends and route where it
will not interfere with linkage or come in contact with exhaust manifolds
or headers.
The water valve can be connected to either heater connection on the
evaporator unit. Make certain the water valve is connected to the hose that
connects to the WATER PUMP, If you only remember one thing during this
installation make certain that the water valve goes to the water pump. We
are stopping the flow of coolant leaving the heater core!
Locate a mounting place for the ECU in a location near the evaporator unit. Don’t permanently mount it just yet,
you can do that after you calibrate it.
For a cleaner installation, we
recommend mounting the
electronic water valve in the
interior area next to the
evaporator
You better freakin read this
VAPIR SYSTEM
Compact A/C
Drain T
ube thru Fir
ewall...
...or Drain Tube t
hru Kick Pa
nel
Heater Hose
Suction Hose
Liquid Hose
Heater
Hose