Restomod Air VAPIR 2 system, Инструкция по установке и руководство пользователя

Страница: 13 / 44

General Procedures and Vehicle Preparation
Our Vapir system is designed to be flexible in it’s final mounting location, but generally the dash area behind
the glove box area is the most common and practical. We’ve included several options for how you can mount the
evaporator.
• It’s a good idea to visualize the final outcome of all components before cutting into your vehicle. If you’re really unsure about a
component fitting, you can always make a paper or cardboard mock up first. Measure twice, cut once.
• The mounting location of the evaporator is usually determined by two factors, space and your desired way to route the heater and
A/C hoses.
• Duct hose routing and vent locations should be given careful consideration before final mounting is selected. Position the vents to
give you optimal air flow. Route hoses so they will not interfere with the operation of controls or other mechanisms.
• Wrap all exposed metal on suction tube or fittings to ensure no condensation will form inside of vehicle and drip on floorboard or
blower motor.
• Retain all parts you remove until after the installation is completely finished.
Vehicle Preparation:
• Before beginning your installation, DISCONNECT THE BATTERY. Next, remove glove box (and console, if equipped) for more
space to work within.
• Remove all OEM heater unit and A/C components. You may be able to reuse the factory style defrost vents.
• Before installation, double check the firewall and transmission tunnel area for any holes or cracks that may allow hot engine air
into the interior of the car. Be sure to seal all of these before completing installation.
Page 11 866.784.4278 www.restomodair.com
VAPIR SYSTEM
Compact A/C