background image

Index

Warning

Warning ............................................................................................... 3
Practical Information ........................................................................... 4
Description of the PLT

®

 Solas ............................................................. 5

Using the PLT

®

 Solas ........................................................................... 6

Maintenance Procedure of the PLT

®

 Solas Launching Unit .............. 10

Refilling the PLT

®

 Air Cylinder ........................................................... 12

Maintenance Procedure of the PLT

®

 Air Cylinder .............................. 13

This manual should be read before operating the PLT

®

 

Solas to ensure correct handling and operation.

The license holder, producer, and seller cannot be held 
responsible for damage caused by the PLT

®

 Solas if the 

product is not used according to this manual.

Always inspect the launching unit, rope, and projectile 
before use. Only use original parts made by Restech 
Norway. Make sure that the area you are launching to is 
clear and safe.

The PLT

®

 Solas must always be treated as potentially 

dangerous device.

The PLT

®

 Solas must not be used indoors.

If you have any questions, please contact your supplier or 
Restech Norway AS.

Always use hearing protections 
when operating the PLT

®

 Solas.

2

3

Содержание PLT Solas









Отзывы: