4h
2h
1h
H
M
L
AUTO
ION
TIMER
SPEED
POWER
CHECK
FILTER
UV LAMP
Model No.
200T
www.respiraide.com
E-16
OPERATION
Connect the Power
When the power plug is inserted
into the wall outlet all the
indicators on the display panel
will light up for 2 seconds.
Main Unit Operation
1
2
3
4
Operating the Unit
Press the POWER(ON/OFF)
button to start operating the
unit.Pressing the Button again
will stop operation.
NOTE:
When the power is
connected, the "CHECK"
indicator light will turn green
and when the unit starts to
run,it will go out.
Manually Switch the Airflow Rate
Each time the SPEED Button is pressed the
airflow rate changes as shown below:
L(Low)------M(Medium)------H(High)------
AUTO( Automatically operate)
AUTO Operation
Setting the Operation Time
Press the "TIMER" Button to select
the time for operation.Each time it is
pressed the timer setting switches
as shown below:
"1h"---"2h"---"4h"---(Cancel)
NOTE:
When the set time is
reached,the operation will
automatically stop.The set time can
be changed if the button is pressed
while the time is operating.
Press the
SPEED
Button
until the
desired
control is
activated.
The fan speed is automatically
switched(HIGH,MEDIUM,LOW)
depending on the amount of pollution in
the air.The sensor detects the pollution
and automatically sets the fan speed for
efficient air purification.
NOTE: At automatic mode, the indicator
turns yellow.
R
