RespirAide 200T Скачать руководство пользователя страница 4

Страница: 4 / 23

E-5

CONSUMER LIMITED WARRANTY

RespirAide AIR PURIFIER

LIMITED WARRANTY

Congratulations on your investment

ＲｅｓｐｉｒＡｉｄｅ　Ｔｅｃｈ　Ｉｎｃ．

To obtain the name and address of the nearest

Authorized RespirAide Dealer, please contact:

13-100 Hanlan Road, Woodbridge, Ontario

Canada L4L 4V8

For more information on this Warranty,Dealer or

Service Locations, please call1-866-874-2532

Visit our website: www.respiraide.com

RespirAide

Tech Inc.(hereinafter called RTI) gives you the following limited warranty for this product

only if it was originally purchased from RTI or from an Authorized RTI Dealer.

RTI warrants that this product is free, under normal use and maintenance, from any defects in material

and workmanship.If any such defects should be found in this product within the applicable warranty

period.RTI shall, at this option, repair or replace the product as specified herein.

RTI will repair or replace, free of charge, to the original purchaser, any part that is found to be defective

in material or workmanship within one (1) year of the date of purchase.This limited warranty does not

cover the replacement of expendable or consumable parts such as filters,and other parts subject to

normal wear unless they are defective in material or workmanship.

This warranty shall not apply to:

(A) Any defects caused or repairs required as a result of abusive

operation,negligence,accident,improper installation or inappropriate use as outlined in the operation

manual.

(B) Any product tampered with modified, adjusted or repaired by any party other than RTI,RTI

Authorized Service Centers or RTI Authorized Service Dealers.

RTI.

(D) Any damage caused by external or enviromental conditions, including but not limited to the use of

voltage other than indicated on the product.

RTI's limited warranty is valid only if you retain proof of purchase from RTI or an RTI Authorized Retail

Dealer for this product.

Содержание 200T
























Результаты поиска

Содержание 200T

Отзывы:

Похожие инструкции для 200T

Бренды по названию

Популярные бренды

RespirAide 200T, Руководство по эксплуатации

Результаты поиска

Содержание 200T

Отзывы:

Похожие инструкции для 200T

Бренды по названию

Популярные бренды