E-7
FEATURES AND SPECIFICATIONS
Multi-Stage Filters
The unit utilizes a two stage electrostatic precipitator combined with a Microbiologic Pre-filter (for large
particles), an Activated Carbon Filter (for odors and gases), UV germicidal light (killing airborne pathogen),
a Photo catalytic filter (removes VOC's) and a Negative ion generator.
Automatic Function
The gas sensor(odor sensor) can let the unit automatically select the appropriate fan speed depending on
the air quality detected.
Filter and UV Lamp Replacement Indicator
The "FILTER" and "UV LAMP" replacement indicators tell you when to replace filter and UV lamp.
Safety Micro-Switch (Interlock Switch)
This air purifier is equipped with safety interlock switches(Micro-safety switch) that turn the unit off if the
front panel is removed while the unit is running.
Easy Maintenance and Low Cost
When the electrostatic precipitator(Electronic cell) needs to be washed or the filters to be replaced, simply
open the front panel and lift out the electronic cell or old filters and drop the new or clean one in.
No screws, hooks or tools are required. The electronic cell captures small particles on aluminum plates
that are simply lifted out and rinsed off in the sink.There are no expensive filters to replace.
Standby Power
In order to operate the electrical circuits while the power plug is inserted in the wall outlet, this product
cosumes about 2W of standby power.For energy conservation, unplug the power cord when the unit is
not in use.
Model No.
Power Requirement
Rated Power
Fan Motor
Fan Speed CFM
Applicable Floor Surface
(Ceiling height 8')
Noise Level
Negative Ion
UV Lamp
Cord Length
Dimensions
Weight
RespirAide200T
120V,60Hz,1.1A
55W
120V,60Hz,0.8A
H-300,M-135,L-88
1 air exchange per hour: 2257 sq.ft.
2 air exchanges per hour: 1129 sq.ft.
5 air exchanges per hour: 451 sq.ft.
19 air exchanges per hour: 10 x 12 sq.ft.
<45dB
>1.2x10
6
pcs/cc
6W
2.5m (8.3 ft)
82cm(H)x48cm(W)x22cm(D) (32.2 in.x18.9 in.x8.7 in.)
29kg+5kg%(63 lbs+5%)
-
-
FEATURES
SPECIFICATIONS
*The applicable floor surface area is appropriate for operating the unit at maximum fan speed.
