E-20
CARE AND MAINTENANCE
Cleaning the Electronic Cell
Remove the electronic cell
a)Stop the operation and unplug the power plug from the electrical outlet.
b)Open the front panel.
c)Remove the electronic cell.
How to clean the electronic cell
a)Use a large enough container,such as a laundry tub or
trash container.
NOTE: Sharp corners on the cells can scratch the surface of a
bathtub.
b)Dissolve about 3/4 cup of automatic dishwasher detergent
per cell in enough hot water to cover the cells.If the
detergent does not dissolve readily,or form a scum on the
water,try another brand,or use softened water.
c)After the detergent has completely dissolved,place the cells
in the container and let soak for 15 to 20 minutes.Agitate up
and down a few times,and remove.
Do not splash the detergent solution in
eyes.Wear rubber gloves to avoid prolonged
detergent contact with skin.
Keep detergent and solution out of reach of
children.
When cleaning be careful not to cut your hands
on the ionizing line.(Wearing rubber gloves is
safer.)
Be careful not to snag or cut the ionizing line.If
the ionizing line is cut,request the dealer to
replace it.If the unit is operated with the ionizing
line cut,there will be no dust collection.
Slide in the cell so the airflow arrow points
downstream.
After cleaning,make sure to
dry the cell
thoroughly before reinstalling.
If the cell or Pre-
filter is wet,it can cause breakdown of the
unit or personal injury.
Washing cell at car wash
Washing cell
in the container
CAUTION
Electronic Cell
1.
2.
3.
4.
5.
6.
