ResMed AirCurve 10 ST-A, Клиническое руководство

Страница: 42 / 60

English 39
To remove the SD card:
1. Open the SD card cover.
2. Push in the SD card to release it. Remove the SD card from the device.
Do not remove the SD card from the device when the SD light is flashing.
To insert the SD card:
1. Open the SD card cover.
2. Push the SD card into the device until it clicks.
The following message is briefly displayed:
Preparing SD card, do not remove power or your
card .
Data storage
The AirCurve 10 device stores summary data such as AHI, Total Hours Used and Leak. Detailed data
such as snore and pulse rate are stored on the SD card and can be viewed with AirView and
ResScan. High resolution flow and pressure data are stored on the SD card.
Data can be transmitted to therapy management software either remotely via cellular
communication, or via SD card. The different ways of transmitting data are detailed in the table
below.
For more information on therapy management with AirView or ResScan, refer to the manuals
supplied with the software.
Type of data Transmission method Sessions stored
Cellular
communication
to AirView
SD card to
ResScan
SD Card to
AirView
(card-to-
cloud)
Summary data (compliance data)
  
365
Detailed data
  
Limited by usage and
SD card storage
capacity
High resolution flow and pressure data
(25 Hz - every 40 ms)

Alarm log
