38
To reassemble the water tub lid:
1.
Insert one side of the lid into the pivot hole of the base.
2.
Slide the other side down the ridge until it clicks into place.
Packaging and storage
Store in a dry, dust-free environment away from direct sunlight.
Storage temperature: -4°F to 140°F (-20°C to 60°C).
Data management and therapy compliance
For therapy management, the AirCurve 10 device stores patient therapy data on the device and has
the ability to transfer it remotely to the care provider. Data can then be accessed via ResMed's
AirView
™
therapy management solution.
The AirCurve 10 device also stores data on the SD card. This data can be transferred via an SD Card
Reader to ResMed's ResScan
™
therapy management system.
For more information on therapy management with AirView or ResScan, refer to the manuals
supplied with the software.
Remote monitoring
The AirCurve 10 device has cellular communication which has the ability to automatically transmit
summary and detailed data on a regular basis. It also allows you to change settings remotely.
The Wireless signal strength icon
displayed at the top right of the screen indicates the signal
strength. To ensure that patient data is transferred, advise the patient of the following:
•
Leave the device connected to the mains power at all times.
•
Make sure that the device is not in Airplane Mode.
•
Check the Wireless signal strentgh icon
for adequate wireless coverage.
Notes:
•
Therapy data might not be transmitted if used outside of the country or region of purchase.
•
Devices with cellular communication might not be available in all regions.
SD card
Every AirCurve 10 device comes with an SD card already inserted and ready to be used. Once the
data is loaded into ResScan or AirView via the SD Card Reader, you can review and analyze data, as
well as update therapy settings and transfer them to the patient’s device via the SD card.
Содержание AirCurve 10 ST-A
Страница 1: ...Clinical guide English...
Страница 9: ...6 The following diagram illustrates these operating modes...
