XCell™ C410:V3 Controller
User Guide
22 repligen.com UG-C410v3-06
When starting the pump, the following dialog box will appear:
Yes
setting is preferred when stopping the diaphragm pump and restarting with the same flow rate
or process settings (i.e. same PRV and PV values as when the diaphragm pump last ran).
Default
setting is preferred when starting the diaphragm pump with new flow rate settings or new
process setup (e.g. different bioreactor configuration and parameters). This minimizes the number
of cycles taken by the controller to reach the desired flow rate. At any selected flow rate, default
simply resets the control parameters to factory preset values.
Cancel
will return to the main screen without any action taken.
Stopping
the pump, the following dialog box will appear:
3.3
Set-up
From the Set-up Screen, an Engineer/Administrator can make entries in the following:
•
Basic Set-up screen
•
Advance Set-up screen
•
Calibration screen
•
Help Guide
•
Exit to Primary screens
•
Navigate to the following secondary screens
