REPLIGEN XCell C410:V3 Скачать руководство пользователя страница 2

Страница: 2 / 69

KrosFlo® TFDF™ Lab System

User Guide

XCell™ C410:V3 Controller

User Guide

2 UG-C410v3-06

The information contained in this document is subject to change without notice.

With respect to documentation accompanying product, Repligen makes no warranty, express or

implied. Any and all warranties related to the documentation accompanying product are expressly

disclaimed. Customer shall refer to the terms and conditions of sale governing the transaction for

any and all warranties for the Product.

Repligen Corporation shall not be liable for errors contained herein or for incidental or

consequential damages in connection with the furnishing, performance, or use of this material.

No part of this document may be photocopied, reproduced, or translated to another language

without the prior written consent of Repligen Corporation.

Products are not intended for diagnostic or therapeutic use or for use in vivo with humans or

animals.

For further information, please contact Repligen Corporation at

www.repligen.com

of Repligen Corporation and/or its affiliate(s) or their respective owners.

Customer Support

[email protected]

+1-800-622-2259 (Option 1)

Repligen Corporation

111 Locke Drive

Marlborough, Massachusetts 01752

www.repligen.com

Содержание XCell C410:V3






































































Результаты поиска

Содержание XCell C410:V3

Отзывы:

Похожие инструкции для XCell C410:V3

Бренды по названию

Популярные бренды

REPLIGEN XCell C410:V3, Руководство пользователя

Результаты поиска

Содержание XCell C410:V3

Отзывы:

Похожие инструкции для XCell C410:V3

Бренды по названию

Популярные бренды