Regulates how much buffering that is used. Higher level
removes more out-of-order packets but increases latency.
Network settings
IP
IP-address on this Trinity-300 series unit.
Netmask
IP-netmask to use.
Gateway
Specifies the default gateway for this unit.
VLAN
VLAN (IEEE 802.1Q) ID, range 1-4094.
Note
Configuring an invalid VLAN ID might result in the loss
of Ethernet connectivity if the there is a mismatch with your
switch configuration.
DNS
Specifies one or more name servers. The default configuration
contains two working servers.
Ethernet speed
Allows for Ethernet speed configuration. The default value is
Auto-negotiation.
Enable SNMP
Enable SNMP version 2c for monitoring.
QoS settings
QoS settings
Allows for Pbit (Ethernet Layer 2 QoS) to DSCP (IPv4)
mapping.
System settings
Unit name
Allows you to specify a custom unit name for easier identification.
Location
