Mounting instruction for Trinity-323 and Trinity-318
See the supplied document for detailed mounting instructions.
Figure 1 - Trinity-323 and Trinity-318 pole mounting
Mounting instruction for Trinity-300
The Trinity-300 is supplied with mounting brackets for pole
mounting.
1. Run the pole clamps around the mounting pole.
2. Run the pole clamps through the mounting brackets.
3. Attach the pole clamps to the unit using the supplied screws.
RJ-45 connector assembly for Trinity-300 Series
The connector casing is delivered assembled, unscrew the con-
nector
(you do not need to remove the gasket (4)).
1. Unscrew the sealing cap from the connector.
2. Gently pull out the seal.
3. Pull the cable through the sealing cap.
4. Insert the RJ45 cable and make sure it is fully inserted into the
connector.
5. Put the seal around the cable and push it into the connector.
6. Fasten the sealing cap to the connector and tighten.
