'Client settings' menu (this menu is only available when the
node is set to operate as Multi-Point master).
Max Transmit rate
This setting actually configures the modulation used for
transmission. If you change the "Channel bandwidth" the same
modulation will be used but the actual data rate is changed as
reflected by the bitrate displayed. The transmission always uses
auto-rate. so the actual used modulation can be lower than the
configured value due to interference or fading of the signal.
Note that when in Multi-Point Master mode, this setting only
applies to broadcast/management traffic, the Max Transmit rate
to the clients is set individually in the 'Client settings' menu.
Link ID
A link ID is an arbitrary, up to 32 character long link identifier,
that allows you to differentiate between multiple links. The link
ID must be equal on the master and client for a connection to
be established.
Passphrase
The passphrase is the encryption key that has to be set (and
match) on both sides of the link.
Regulatory domain
The frequency band is divided up into channels, with each local
regulatory agency defining what is permitted for use in its area.
This effects the available channels.
