34
Setting IN: Standard setting, see table
LOWER threshold IN (standard 14.4 °C): Push the “SET” button; the temperature for the lower threshold flashes; change
this value with the buttons “+” or “-”.
UPPER threshold IN (standard 28.9 °C): Push the “SET” button; the temperature for the upper threshold flashes; change
this value with the buttons “+” or “-”.
Setting USE: Standard setting, see table
Manual setting of the backlighting: Push the “SET” button. The display shows COLOR. Use the buttons “+” or “-” to select
the desired background colour.
No.
Colour(USE)
OUT Temp.
IN Temp.
Note:
The threshold for max. and min. can be
changed.
1
White
< (-12.0)
< (14.5)
(min. threshold)
2
Rose
(-12.0) ~ (-6.5)
(14.5) ~ (16.0)
3
Violet
(-6.5) ~ (-1.0)
(16.0) ~ (17.5)
4
Blue
(-1.0) ~ (4.5)
(17.5) ~ (19.5)
5
Light blue
(4.5) ~ (10.0)
(19.5) ~ (21.0)
Color Increment = (HI-LOW)/9
6
Green
(10.0) ~ (15.5)
(21.0) ~ (23.0)
7
Light green
(15.5) ~ (21.0)
(23.0) ~ (24.5)
8
Yellow
(21.0) ~ (26.5)
(24.5) ~ (26.0)
9
Orange
(26.5) ~ (32.0)
(26.0) ~ (27.0)
10
Red
(32.0) ~ (37.5)
(27.0) ~ (29.0)
11
Crimson
> (37.5)
> (29.0)
(max. threshold)
•
Brightness:
Briefly push the “SET” button. You will get to the settings for the backlighting brightness (factory setting 8).
Set the desired brightness (1 = min.; 8 = max.) with the buttons “+” or “-”.
Factory settings: Disconnect the weather station from the plug-in mains adapter. Remove the batteries. Push and
hold the HISTORY/- button and connect the weather station to the mains adapter again or insert the batteries
again. The display shows “RESET”. The SETUP values have been reset to the factory settings.
12. Switching the outdoor sensors
• When more than one outdoor sensor is logged on to the weather station, briefly push the button “CHANNEL” to switch
between the outdoor sensors and display their measured values. The respective channel number (11) is displayed.
• If switching between the outdoor sensors is to take place automatically, push the button “CHANNEL” repeatedly until
the symbol SCROLL MODE (12) appears in the display.
The measured values of the outdoor sensors are displayed here in sequence for 5 seconds (and the associated channel
number).
