33
•
1
2/24 hour format:
The display “12H” or 24H” flashes; set the desired format with the buttons “+” or “-”.
In 12h mode, “PM” is displayed to the right of the time in the second half of the day.
•
Hour settings:
Briefly push the “SET” button. The hours of the time flash. Set them with the buttons “+” and “-”.
•
Minute settings:
Briefly push the “SET” button. The minutes of the time flash. Set them with the buttons “+” and “-”.
Each push of a button will also automatically reset the seconds to “00”.
•
Date format:
Push the “SET” button. You will enter the setting mode for the date format. Use the buttons “+” or “-” to
select the desired date format MM-DD-YY (month-day-year), DD-MM-YY (day-month-year) or YY-MM-DD (year-month-
day).
•
Month:
Briefly push the “SET” button. The months of the date flash. Set them with the buttons “+” and “-”.
•
Day:
Briefly push the “SET” button. The days flash. Set them with the buttons “+” and “-”.
•
Year:
Briefly push the “SET” button. The years of the date flash. Set them with the buttons “+” and “-”.
•
Max./Min. Setting:
Briefly push the “SET” button. You will get to the setting max./min. Clearing. Choose between the
setting CLR ON and CLR OFF. For the setting CLR ON, the max./min. values are automatically deleted at midnight every
day. For the setting CLR OFF, the max./min. values can only be deleted manually. Set the desired mode with the buttons
“+” or “-”.
•
Temperature unit:
Briefly push the “SET” button. The display UNIT SET appears in the display and the temperature
unit flashes. Use the buttons “+” or “-” to choose between the temperature display °C or °F.
•
Barometric pressure unit:
Briefly push the “SET” button. The display UNIT SET appears in the display and a baro-
metric pressure unit flashes. Use the buttons “+” or “-” to choose between the measuring units mb/hPa, mmHg or inHg
for barometric pressure.
•
Threshold barometric pressure:
Briefly push the “SET” button. Display WEATHER (2-4) appears in the display (fac-
tory settings 2). Use the buttons “+” or “-” to set the threshold 2-4 for the barometric pressure. Observe item “threshold
barometric pressure”.
•
Threshold storm warning:
Briefly push the “SET” button. Display STORM (3-9) appears in the display (factory setting
4). Use the buttons “+” or “-” to set the threshold 3 mbar/h - 9 mbar/h for storm warning. Also observe the item Storm
Warning on this.
•
Symbol weather forecast:
Briefly push the “SET” button. The symbol weather forecast appears in the display. Use
the buttons “+” or “-” to set the corresponding symbol, depending on the current weather situation.
•
Background colour:
Briefly push the “SET” button. You will get to the settings for the backlighting (factory setting:
OUT). The background colour of the weather station switches colour depending on the temperature of the outdoor
sensor 1 or the indoor temperature. A colour can also be set manually.
- Setting OUT: The temperature of channel 1 of the outdoor sensor is used for the automatic background colour of the
display.
-
Setting IN: The indoor temperature is used for the automatic background colour of the display.
- Setting USE: Manual setting of the background colours (11 options).
- Set the desired mode with the buttons “+” or “-”.
The following settings depend on the selection of OUT, IN or USE:
Setting OUT: Standard setting, see table
LOWER threshold OUT (standard -12.2 °C): Push the “SET” button; the temperature for the lower threshold flashes; change
this value with the buttons “+” or “-”.
UPPER threshold OUT (standard 37.8 °C): Push the “SET” button; the temperature for the upper threshold flashes; change
this value with the buttons “+” or “-”.
