34
Analogue display (21)
(With battery level indicator)
Displays the approximate material type (right = non-ferrous metal, left =
ferrous metal)
When the battery voltage is low (<7 V/DC), the pointer does not point
towards the green area.
Speaker
Audio signals
Headphone socket (10)
Connect a suitable headset to the 3.5 mm jack socket. The speaker will
switch off automatically.
SENSITIVITY
dial (8)
This dial adjusts the metal detector for different search depths and prevents
false detection signals and electromagnetic interference (sensitivity).
"FERROUS" LED indicator
(red) (17)
This LED indicates the detected metal type. When the LED turns on, this
indicates that the detected metal contains iron.
"NON-FERROUS" LED indicator
(green) (6)
This LED indicates the detected metal type. When the LED turns on, this
indicates that the detected metal does not contain iron.
Battery test switch (14)
Use this switch to select the operating mode and battery test mode.
b) Adjusting the display pointer
SENSITIVITY
VERY LOW FREQUENCY
DISCRIMINATOR DETECTOR
• Turn the
MODE
dial (16) anticlockwise to switch off the metal detector. The
metal detector switches off when the dial clicks into place in the "OFF" position.
• Use a suitable screwdriver to turn the adjustment screw (20) and adjust the
pointer on the analogue display (21) to "0".
• Readjust the pointer if it does not point towards zero when the metal detector
is switched off.
c) Switching on and off
TUNE
FERROUS
NON-FERROUS
MODE
VLF
TR1
OFF
TR2
GROUND
DISCRIMINATION
SENSITIVITY
MIN MAX
MIN MAX
• The metal detector is switched off when the
MODE
dial (16) is in the "OFF"
position.
• Turn the
MODE
dial (16) clockwise to switch on the metal detector. The metal
detector switches on when the dial clicks into place. One of the LED indicators
(6 or 17) will turn on and you will hear an audible signal.
• Turn the
MODE
dial (16) anticlockwise to switch off the metal detector. The
metal detector switches off when the dial clicks into place in the "OFF" position
(depending on the selected mode, the dial may need to be moved up to three
times). The LED indicators (6 or 17) will switch off.
