Renishaw RMI-QE, Руководство по установке

Страница: 34 / 54

RMI-QE installation guide
3.8
System installation
Radio probe – RMI-QE partnership
The radio probe and RMI-QE must be placed into “Partnering mode” .
On the RMI-QE, “Partnering mode” is achieved either by manually power cycling the RMI-QE, or via
application of ReniKey which is a Renishaw machine macro cycle.
The radio probe can be placed into
”Partnering mode”
using either probe partnering function with the
Trigger Logic™ technique or Opti-logic™ technique.
Trigger Logic™
Trigger Logic is a method that allows the user to view and select all available mode settings in order to
customise a probe to suit a specific application.
“Partnering mode”
is activated by battery insertion
then, whilst the
“Battery status”
is being displayed, deflect and immediately release the stylus to
enter
“Partnering mode”
.
Opti-Logic™
Opti-Logic enables the user to review the settings, partner the probe and configure the probe via a
smartphone or tablet.
The Renishaw Probe Setup app uses Opti-Logic to partner the probe and guides the user through
the partnering process based on the compatibility of the probe. The Probe Setup app simplifies this
process with clear interactive instructions and informative videos. The Probe Setup app is available for
download on the App Store and Google Play and also from several app stores in China.
or
To partner the radio probe with the RMI-QE
Partnering is required during initial system set-up. Further partnering will be required if either the radio
probe or RMI-QE are changed.
When any radio probe is partnered with an RMI-QE, but then used with another system, it is
recommended that it is cleared first from the RMI-QE before being partnered with the new system. The
radio probe will also need to be partnered again should it be brought back to the RMI-QE.
Partnering will not be lost by reconfiguration of probe settings or when changing batteries.
NOTES:
Do not attempt to partner the RMI-QE to a probe if there is another RMI-QE and probe within the
transmission range being partnered at the same time.
The RMI-QE is not compatible with
“Multiple probe mode”
, used on previous generation probes.