Renishaw RMI-QE, Руководство по установке

Страница: 25 / 54

2.15
RMI-QE basics
RMI-QE specification
Principal application
All machining centres, 5-axis machines, twin spindle machines and
vertical turret lathes.
Dimensions Height
Width
Depth 59.2 mm (2.33 in)
71.2 mm (2.80 in)
40.5 mm (1.59 in)
Weight
RMI-QE including 8 m (26.2 ft) of cable = 627 g (22.12 oz)
RMI-QE including 15 m (49.2 ft) of cable = 1047 g (36.93 oz)
Transmission type Frequency hopping spread spectrum (FHSS) radio
Radio frequency 2400 MHz to 2483.5 MHz
Probes per system
Radio M-code on = up to four
Spin/shank switch on = up to four
Compatible probes
1
Component setting/inspection: RMP40, RMP40M, RMP400, RMP60,
RMP60M and RMP600
Lathe inspection: RLP40 and RLP40H
Tool setting: RTS
Operating range
Up to 15 m (49.2 ft)
Supply voltage 12 Vdc to 30 Vdc
Supply current 500 mA peak, < 200 mA typical from 12 V to 30 V
Configurable M-code input
Pulsed or level
Output signal Probe Status 1, Low Battery, Error
Voltage-free solid-state relay (SSR) outputs, configurable normally
open or normally closed.
Probe Status 2a
5 V isolated driven output, invertible.
Probe Status 2b
Power supply voltage driven output, invertible.
Input / output protection
Electronically protected inputs.
Outputs protected by over current protection circuit.
Diagnostic LEDs Start, low battery, probe status, error, signal condition and P1, P2, P3,
P4 system status.
Cable
(to machine
controller)
Specification Ø6.1 mm (0.24 in), 16-core screened cable, each core
28 AWG.
Length 8 m (26.2 ft) and 15 m (49.2 ft) standard lengths.
Optional 30 m (98.4 ft) and 50 m (164.0 ft) cable
assemblies are also available.
Mounting
Flush mounting. Sub mounting or directional mounting are also
possible with optional mounting brackets (available separately).
Environment IP rating IPX8, BS EN 60529:1992+A2:2013
(IEC 60529:1989+A1:1999+A2:2013)
IK rating IK03 (BS EN IEC 62262: 2002) [for glass window]
Storage
temperature –25 °C to +70 °C (–13 °F to +158 °F)
Operating
temperature +5 °C to +55 °C (+41 °F to +131 °F)
1
See page 2.2, “Probe compatibility” , for further information.