Renishaw HPGA, Инструкция по установке и эксплуатации

Страница: 9 / 40

7
Before you begin
REACH regulation
Information required by Article 33(1) of
Regulation (EC) No 1907/2006 (“REACH”)
relating to products containing substances
of very high concern (SVHCs) is available
at:
www.renishaw.com/REACH
China RoHS
For more information on China RoHS,
visit:
www.renishaw.com/mtpchinarohs
FCC information to user (USA only)
Supplier’s declaration of conformity
47 CFR Section 2.1077 Compliance
information
Unique identifier: HPGA high-precision
generic arm
Responsible party – US contact
information
Renishaw Inc.
1001 Wesemann Drive
West Dundee
Illinois
IL 60118
United States
Telephone number: +1 847 286 9953
Email: usa@renishaw.com
FCC compliance statement
47 CFR Section 15.19
This device complies with part 15 of the
FCC Rules. Operation is subject to the
following two conditions:
1. This device may not cause harmful
interference, and
2. This device must accept any
interference received, including
interference that may cause
undesired operation.
47 CFR Section 15.21
The user is cautioned that any changes or
modifications not expressly approved by
Renishaw plc or authorised representative
could void the user’s authority to operate
the equipment.
47 CFR Section 15.105
This equipment has been tested and found
to comply with the limits for a Class A
digital device, pursuant to part 15 of the
FCC Rules. These limits are designed
to provide reasonable protection against
harmful interference when the equipment
is operated in a commercial environment.
This equipment generates, uses, and can
radiate radio frequency energy and, if not
installed and used in accordance with the
instruction manual, may cause harmful
interference to radio communications.
Operation of this equipment in a
residential area is likely to cause harmful
interference in which case the user will be
required to correct the interference at their
own expense.