Hardware Design Specification
ASD-B-16-0247 Rev1.3
Page 103 of 105
September 8, 2017
RTK00V2XRC7746SFS
Integrator Instructions
：
EUT name: Tethys
FCC ID: 2AHMN-TETHYS
Additional Regulatory Conformance Testing and/or Submissions
Required by the Integrator:
The OEM integrator is responsible for additional system-level EMC and Product Safety testing and certification that
applies in the U.S. and other countries to the host system containing the Module. This includes, but is not limited to
Federal
Communications Commission FCC Part 15 Class B Digital Emissions, and ETSI EN 301 489-1/-3/-19.
These system-level EMC tests are to be done with the Module installed and included in the scope of the submission.
European Community RED
RF exposure information: The Maximum Permissible Exposure (MPE) level has been calculated based on a distance of
d=20 cm between the device and the human body. To maintain compliance with RF exposure requirement, use product
that maintain a 20cm distance between the device and human body.
Sound pressure warning
：
Use careful with the earphone maybe possible excessive sound pressure from earphones and headphones can cause
hearing loss
Caution:
Risk of electric Shock, dry location use only
Don’t open the case
Adapter description:
Adapter shall be installed near the equipment and shall be easily accessible.
The plug considered as disconnect device of adapter.
USB description:
The product shall only be connected to a USB Interface of version USB2.0
Restriction info:
The device operated in the European Community using frequency in 5.9GHz
，
Restriction in BE,BG,CZ,DK,DE,EE,IE,EL,ES,FR,HR,IT,CY,LV,LT,LU,HU,MT,NL,AT,PL,PT,RO,SI,SK,FI,SE,UK
