Renault KANGOO BE BOP Скачать руководство пользователя

Страница: 99 / 198

3.5

The air flow is directed mainly

towards the footwells.

The air flow is directed to all air

vents and the footwells.

This is the recommended position for

the best temperature in hot weather.

The air flow is directed mainly

to the dashboard vents. This

position allows the passenger compart-

ment to be heated or cooled more

quickly.

Rapid demisting

Turn the controls to the positions

marked as

– air from the outside;
– maximum temperature;
– demisting.
Using the climate control increases the

speed of demisting.

The air flow is directed to the

windscreen demisting vents,

the side windows and the passenger

footwells.
This is the recommended position for

the best temperature in cold weather.

HEATING/AIR CONDITIONING

(2/3)

Distribution of air in the

passenger compartment

Turn control

so that the pointer is po-

sitioned opposite the marked positions.

The air flow is directed to the

windscreen demisting vents

and the side windows. This position

prevents the formation of condensa-

tion.

Содержание KANGOO BE BOP







































































































































































































Результаты поиска

Содержание KANGOO BE BOP

Отзывы:

Похожие инструкции для KANGOO BE BOP

Бренды по названию

Популярные бренды

Renault KANGOO BE BOP, Руководство водителя

Результаты поиска

Содержание KANGOO BE BOP

Отзывы:

Похожие инструкции для KANGOO BE BOP

Бренды по названию

Популярные бренды