Renault KANGOO BE BOP Скачать руководство пользователя

Страница: 145 / 198

5.5

CHANGING A WHEEL

(2/2)

Anti-theft bolt

If you use anti-theft bolts, fit these

nearest the valve (wheel trim may

not be able to fit).

If you have a puncture, re-

place the wheel as soon as

possible.
A tyre which has been punc-

tured should always be inspected

(and repaired, where possible) by a

specialist.

Undo the bolts and take off the wheel.

For vehicles fitted with alloy wheel rims,

use the guide bolt located in the tool kit

to finish loosening and start tightening

the bolts. For more information on this

tool, refer to Section 5 “Tool kit”.
Fit the emergency spare wheel on

the central hub and turn it to align the

mounting holes in the wheel and the

hub.
Tighten the bolts and lower the jack.
If bolts are supplied with the emergency

spare wheel, only use these bolts for

the emergency spare wheel.
Tighten the bolts, checking that the

wheel is correctly positioned on its hub

and lower the jack.
With the wheels on the ground, tighten

the screws as fully as possible and

check the tightness as soon as possi-

ble (tightening torque 110 Nm).

Содержание KANGOO BE BOP







































































































































































































Результаты поиска

Содержание KANGOO BE BOP

Отзывы:

Похожие инструкции для KANGOO BE BOP

Бренды по названию

Популярные бренды

Renault KANGOO BE BOP, Руководство водителя

Результаты поиска

Содержание KANGOO BE BOP

Отзывы:

Похожие инструкции для KANGOO BE BOP

Бренды по названию

Популярные бренды