Renault KANGOO BE BOP Скачать руководство пользователя страница 172

Страница: 172 / 198

5.32

OPERATING FAULTS

(5/5)

Rear door and sliding rear

sunroof

POSSIBLE CAUSES

WHAT TO DO

Rear door cannot be opened.

The rear screen cannot be lowered

using the opening control.

Consult an approved dealer.

The window is open but the door re-

mains locked.

Wait a few minutes, then retry.
If there is still a problem, contact an approved

dealer.

The screen is open and the door

cannot be opened.

The window winder has been reset

(e.g.: disconnection of the battery).

The following operations must be carried out:
– with the ignition on, close the tailgate;
– operate the rear screen control button located on

the handbrake as many times as necessary until

the screen is fully closed;

– when the screen is fully closed, continue to pull

on the button for 7 seconds;

– release the button then open the screen again: it

should automatically open fully.

The screen can now be controlled normally.
If there is still a problem, contact an approved

dealer.

Содержание KANGOO BE BOP







































































































































































































Результаты поиска

Содержание KANGOO BE BOP

Отзывы:

Бренды по названию

Популярные бренды

Renault KANGOO BE BOP, Руководство водителя

Результаты поиска

Содержание KANGOO BE BOP

Отзывы:

Бренды по названию

Популярные бренды