Renault KANGOO BE BOP Скачать руководство пользователя страница 78

Страница: 78 / 198

2.8

Engine adjustments

– Ignition:

this does not require ad-

justment.

– Spark plugs:

for optimum fuel econ-

omy, efficiency and performance,

the specifications laid down by our

Design Department must be strictly

applied.
If the spark plugs have to be

changed, use the make, type and

gap specified for your vehicle’s

engine. Contact an approved Dealer

for this.

– Idle speed:

this does not require ad-

justment.

– Air filter, diesel filter:

a choked el-

ement hinders performance. It must

be replaced.

Maintenance

It should be noted that failure to respect

antipollution regulations may lead to

legal action being taken against the

vehicle owner. In addition, replacing

engine, fuel supply system and exhaust

components with parts other than those

originally recommended by the manu-

facturer may alter your vehicle so that

it no longer complies with antipollution

standards.
Have your vehicle checked and ad-

justed by an approved Dealer in ac-

cordance with the instructions in your

Maintenance Service Document. Your

Dealer has all the equipment necessary

for ensuring that your vehicle is main-

tained to its original standard.

ADVICE: antipollution, fuel economy and driving

(1/3)

Your vehicle complies with criteria for

recycling and recovering vehicles at the

end of their service life which will come

into force in 2015.
Some parts of your vehicle have there-

fore been designed to facilitate future

recycling.
These parts are easy to remove so

that they can be recovered and reproc-

essed by recycling companies.
By virtue of its design, moderate fuel

consumption and initial settings, your

vehicle also conforms to current anti-

pollution regulations. The manufac-

turer is actively striving to reduce pol-

lutant exhaust gas emissions and to

save energy. But the fuel consumption

of your vehicle and the level of pollutant

exhaust gas emissions are also your

responsibility. Ensure that it is main-

tained and used correctly.

Содержание KANGOO BE BOP







































































































































































































Результаты поиска

Содержание KANGOO BE BOP

Отзывы:

Бренды по названию

Популярные бренды

Renault KANGOO BE BOP, Руководство водителя

Результаты поиска

Содержание KANGOO BE BOP

Отзывы:

Бренды по названию

Популярные бренды