Renault KANGOO BE BOP Скачать руководство пользователя страница 144

Страница: 144 / 198

5.4

Switch on the hazard warn-

ing lights.
Keep the vehicle away from

traffic and on a level sur-

face where it will not slip (if neces-

sary, place a solid support under the

jack base).
Apply the parking brake and engage

a gear (first or reverse).

Ask all the passengers to leave the

vehicle and keep them away from

traffic.

CHANGING A WHEEL

(1/2)

Continue tightening to position the

baseplate on the ground correctly. Turn

handle

on the jack to lift the wheel off

the ground.

Use the wheelbrace to slacken off the

wheel bolts

. Fit it so that you press

downwards rather than pulling up-

wards.
Start extending jack

by hand, turning

the handle.
Position the jack head against jacking

point

closest to the wheel concerned

and, depending on the vehicle, the area

marked by a triangle. If the ground is

soft, place a plank of wood under the

baseplate.

To prevent any risk of injury

or damage to the vehicle,

only crank the jack until the

wheel you are replacing is

a maximum of 3 centimetres off the

ground.

If the vehicle is parked on

the hard shoulder, you must

warn other road users of

your vehicle’s presence

with a warning triangle or with other

devices as per the legislation apply-

ing to the country you are in.

Содержание KANGOO BE BOP







































































































































































































Результаты поиска

Содержание KANGOO BE BOP

Отзывы:

Бренды по названию

Популярные бренды

Renault KANGOO BE BOP, Руководство водителя

Результаты поиска

Содержание KANGOO BE BOP

Отзывы:

Бренды по названию

Популярные бренды