Rena Ware AQUA II 5000, Руководство пользователя

Страница: 6 / 28

6
III. Installation
(continued)
AQUA
3
II WATER FILTER PARTS:
A adapters —the optional
attachments used to connect the
diverter valve to the faucet
B base —contains flow meter and
supports manifold
C body-cover —the shell which
covers the two filter housings
D clamp —the small white device
which holds the inlet tube onto
the top barb of the diverter valve
E diverter valve barbs —the
extensions on the diverter valve
onto which the tubing is placed
F diverter valve —allows
convenient at-faucet switching
from tap to filtered water
G flow-meter —monitors the
number of liters of water treated
by the AQUA
3
II water filtration
system
H flow-meter viewing window —
allows you to view flow-meter
I housing wrench —used to
loosen the filter housings if they
become too tight to hand loosen;
never use the housing wrench to
tighten the filter housings.
J manifold —connects the pre-filter
with the main filter
K multi-media filter —provides
final multiple stage filtration of
water
L multi-media filter housing —the
white cylinder which covers the
multi-media filter
M O-rings —creates seal between
multi-media filter housing, pre-
filter housing and manifold
N pre-filter ceramic candle —acts
as a pre-filter, providing initial
filtration of water before it passes
on to multi-media filter
O pre-filter housing —the white
cylinder which covers the pre-
filter ceramic candle
P pressure release valve —allows
residual pressure to be released
from the pre-filter housing
Q scouring pad —used to clean
the pre-filter ceramic candle
R small wrench —used to
disconnect the tubing from
the tubing receptacles in the
manifold
S socket —openings where the
filters are inserted
T tubing —the double tubing which
connects the diverter valve on
the faucet with the AQUA
3
II
water filtration system. The inlet
tube extends from the top barb
of the diverter valve to the tubing
receptacle marked (+) and is
marked with a black dashed line
U tubing inserts —the inserts at
the end of each tube
V tubing receptacles —the
openings in the manifold where
the tubing is inserted, inlet (gray)
and outlet (white)
W release button —press to
release the base from the main
unit
X spout —releases filtered water
Y elbow —attaches spout to tubing
outlet receptacle
Z single inlet tubing —connects the
single diverter valve to the inlet
receptacle
NOTE: Your Aqua
3
II 5000 will have either a spout or a double diverter
valve assembly, depending on the model.