Remote Reality OneShot360, Руководство пользователя

Страница: 25 / 61

Chapter 3 OneShot360 Viewer Software
19
Marking the Image
When you open a OneShot360 image, OneShot360 Viewer will
automatically detect the boundary of the circular image.
However, in some cases (images with low contrast), the software
may require you to mark the image to indicate the boundary of
the circular picture. An info box (below) will prompt you to do
so.
Without this information, the software will generate incorrect
results when you go to publish the OneShot360 image.
To mark image boundaries, proceed as follows:
•
Click and drag the cross hairs (shown in pink in the software)
to match the center of the circular image.
•
Click and drag the circle (shown in pink in the software) to
precisely match the outer edge of the circular image.
Center
of
Image
Edge of
circular
image