R
EMOS
3
600
57
57
R
EMOS
3
600
Remark:
8.19
Exhaust system servicing
The REMOS exhaust system used on the
REMOS G-3 /600 is manufactured from
stainless steel. To provide suitable cabin
temperature, especially in cold climates, a
cabin heating system is included. The muffler
is held in place by eight wire springs at the
connection to the down-pipes. These springs
are sealed with heat resistant silicon to protect
them from cracking. When reassembling the
exhaust system, great care has to be taken, to
ensure no part of the exhaust system touches
other components in the engine compartment.
No welding should be done to the muffler /
cabin heater, if any cracks are visible, the
muffler has to be exchanged! The exhaust
system needs no servicing between regular
service intervals, but we recommend to check
for cracks prior to each flight.
Please take care about the following steps when reassembling the muffler:
Use copper grease on the connections between the down-pipes and muffler.
Seal each spring mount with heat resistant silicon, to protect against cracking.
EGT-
probes
Stainless-
steel down
Retaining
with heat
silicon coa
Aluminum cabin-
heater shell
Stainless steel
muffler
Aircraft Ground Handling and Servicing
8