R
EMOS
3
600
41
41
R
EMOS
3
600
If the engine does not start, release the key to position "0", wait 2 minutes and repeat
the procedure.
continued from previous page
Starting a hot engine:
1.
2.
3.
Pull the throttle lever back to the idle position
Turn the key clockwise to the "Start" position until the engine has started (do not
hold the key in the "Start "position for more than 10 seconds, in order to avoid
overheating the starter)
Release ignition key immediately after the engine has started
After starting the engine:
1.
2.
3.
4.
Check oil pressure immediately after the engine has started
Adjust engine rpm as required - for warm up
maximum 2500 rpm
Before take-off, oil and water temperature must reach at least
120°F
Switch on avionics master switch and avionics as required
Engine rpm and propeller check:
1.
2.
3.
4
Set parking brake
Adjust engine to
4000 rpm
Check both magnetos - maximum rpm decrease 300 rpm
Set engine to idle, release parking brake
5.
6.
7.
Release ignition key, immediately after the engine has started
Push the choke lever forward
Switch off the electric fuel pump
Normal Procedures
7